HOME > Woodworking Machine > Sander > Wide Belt Sander > The Final Sanding/ Denibbing Machine GB-1000H

The Final Sanding/ Denibbing Machine GB-1000H
Features:
  • Exclusive panel pressure device
    The panel pressure device is specially designed to handle small pieces of stock. It requires no blower, saving space and cost.
  • Simultaneous Longitudinal and cross sanding
    The advance design consists of 2 reversible crosswise spindles and 4-5 short longitudinal spindles to make reversible running and reciprocating movement. This permits cross and longitudinal sanding to be performed simultaneously. Any types of irregular surfaces can be sanded easily and quickly
  • Convenient sanding belt replacement
    Simple loosentwo screws,and the sanding belt can be conveniently and quickly replaced. No dismantling of bearings is necessary.
  • Precision Ball Screws
    The conveyor table is supported by precision ball screws, providing extremely smooth and accurate table elevation.




    Special design for alterable parts of the brush.


    H Type
    Suited for more irregular surfaces with less surface sanding.
    HB Type
    Suited for complicated irregular surface with surface sanding.
    HBE Type
    Suited for simple irregular surfaces with more surface sanding.
    Various sanding head configurations for choice

    Quick replace sanding belt device. Hand-adjustable with micro-adyustment. Pressure gauge(can control from the machine front and rear are both setting pressure gaugets) Body activated emergency stop bar.
    Emerbency switch on the machines rear.(the emergency to stop working decision depend on rear operater. It can decrease lose when improper control.) Control panel(include computer elevation controller ,except H series). Disc braking mechanism. Variable speed feed rate.

    Description:
    MODEL GB-1000 H GB-1000 HB GB-1000 HBE
    Max.working width(mm) 900 900 900
    Max.working thickness(mm) 150 150 150
    Main motor - 15HP 15HP
    Sanding belt size - 37"x75" 37"x75"
    Lateral spindle motors 2 HP x2 2 HP x2 2 HP x2
    Vertical spindle motors 1/2 HPx4 1/2 HPx4 -
    Feed motor 2HP 2HP 2HP
    Brush motor - 1/2HP 1/2HP
    Table hoist motor 1/2HP 1/2HP 1/2HP
    Feed speed range (M/min) 3-12±5% M/min 3-12±5% M/min 3-12±5% M/min
    Diameter of sand brush (mm) 305 305 305
    Working pressure (kg/cm2) 7kg/cm2 7kg/cm2 7kg/cm2
    Machine size (cm) 280 x 220 x 166 cm 315 x 220 x 203 cm 275 x 220x 203 cm
    Packing size (cm) 285 x 225 x 188 cm 318 x 225 x 223 cm 278 x 225 x 223 cm
    Net weight / Gross weight 2280 / 2470 kgs 3400 / 4000 kgs 3100 / 3600 kgs