Glue spreader is used for spreading glue uniformly on veneers. Uniform gluing with the exact amount of adhesives improves the quality of plywood and saves a huge amount of expense in the long run.
The clearance between the glue rolls and the doctor roll, in which a stepless change in rotation is available, can be freely adjusted according to the viscosity and the amount of glue to be spread.
The waste scrape the glue roll. When it insert to the clearance either between the glue rollsˇFor between the glue roll and the doctor roll, the rolls are separate quickly by air cylinder. So the waste fall down and can not scrape the glue roll.
This m/c uses a stepless morda inverter in model, it can control efficiently the stabifity of running motor and the horse power of the output. Af the operation the exchanged velocity. It can adjust easily the needed gluing velocity according to the actual gluing situation.(Nonstep speed change).
Besides, the machine is specially equipped with an emergency stop switch can immediately stop the running machine in emergency conditions. The operator can activate the emergency stop switch within a very short time to ensure the safety of the operator.
Specifications:
| MODEL |
LVGS-9 |
| Main rubber rolls |
350O x 2730x 2 SETS |
| Doctor rolls |
230O x2730 x 2 SETS |
| Clearance between Rubber rolls |
0~55 By handle |
| Adjustment of doctor rolls |
One touch control by pneumatic system & fine adyustment by handle with revolution indicator. |
| Feed speed(Stepless inverter) |
0~120HZ(230M/MIN) |
| Outfeed Speed |
96M/MIN |
| For Outfeed Conveyor |
1.5KWx4P |
|
For Main motor for rolls drive | 5.5KWx4P |
|
Machine dimension | 1010(W)x4225(L)x1700(H)mm |
| Machine weight(opprox) |
4,250kgs |
| Optional Accessories: Air Compressor with 2.2kw motor (required 5kg/cm2 pressure air, 200 L/min,freeair) |
|
