 |
 |
 |
1. FEED ROLLER PRESSURE REGULATION VALVE
The pressure for infeed and outfeed roller can be agjusted separately for extremely smooth feeding performance. |
2. REDUCE DISTANCE ROLLER
It guarantce transport of short workpiece. The workpiece can be hold firmly against the fence to avoid the workpiece jumping that may effect the quality of product. This device is movable for convenient toll replacement of vertical spindle. |
3. FEEDING SYSTEM
This machine use warm gear reducer and universal joint shaft to feed the workpiece through smoothly. |
 |
 |
 |
4. VARIABLE SPEED ADJUST DEVICE
Feed speed via inverter provide positive feed. This machine can adjust the feeding speed according to the actual need. The speed range is 6-36M/min. (Mouldtec type is 6-30M/min) |
5. CONTROL PANEL
All of the machine controls are centralized in a control panel. Each push button is clearly identified for easy to operate. |
6. MACHINE FRAME
The machine frame is welded from thick gauge steel paite, ruggedly constructed and precision machined for superior cutting acuracy and long service life. |
 |
 |
 |
7. OUT FEED TABLE
The out feed table can be adjusted for desire chip removal. |
8. CENTRAL LUBRICATING FOR SPINDLE
Central lubricating points help make maintenance easily. |
9. MOBILE JOG PANEL BOX
It is convenient for user to take walking around the machine while setting up. |
 |
 |
 |
10. DIGITAL INDICATOR
Fast and accurate cutterhead set up is achieved through the application of digital readout |
11. DRIVEN TABLE ROLLER
Driven table roller reduce table wear out and guarantee the feed through of workpiece without getting stuck. |
12. FRONT AND REAR PRESSURE DEVICE FOR UPPER SPINDLE
The holding pressure for both plates can be adjusted individually that permitting for firm stock hold down regardless of thickness variation. |
 |
 |
 |
13. FILL-IN-PIECE
This part can adjust according to the diameter of tool. It provide s support for workpiece while cutting processing and ensure accurate cutting performance. |
14. DRIVE Infeed TABLE ROLLER
The drive infeed table roller provides maximum smoothness of workpiece feeding for all types of wood material, regardless of highly moisture or extra hard materials. |
|
 |
|
|
16. SPINDLE
The spindle is supported by two pair of bearing to ensure accurate performance under high speed rotation. |
|
|
 |
 |
 |
SPECIAL SPINDLE FOR COCK-JOINT PARQUET
The machanism is consists of right/ left universal spindle, which is driven by germany high frequency motor. Spindle speed is 6000~9000 RPM. Independent drive design. The head can be swiveled 360 degree, ensuring outstanding lock-joint accuracy. |
FREQUENCY INVERTER CONTROL
The feed speed is controlled by a high performance frequency inverter, permitting for variable speed adjustment to suit all types of wood material. |
DRIVE TABLE ROLLER
Driven table roller reduce table wear out and guarantee the feed through of workpiece without getting stuck. |
 |
 |
 |
REDUCE DISTANCE ROLLER
It guarantees transport of short workpiece. The workpiece can be hold firmly against the fence to avoid the workpiece jumping that may effect the quality of product. This device is movable for convenient tool replacement of vertical spindle. |
AUTOMATIC FEEDING DEVICE (OPTINAL)
This device can feed the workpiece into the machine for processing instead of hand feed. It can increase the production and keep the operator from danger. The most important is the operator have enough time to choice the better surface to process and get the perfect finish. |
CUTTING ILLUSTRATION DIAGRAM LOCK-JOINT DIAGRAM |
| MODEL |
PMU-230C |
| Max. workig width |
15-230 mm |
| Max. workig height |
10-100 mm |
| Infeed tabel length |
2 M |
| Motor horse power |
Bottom |
7.5 HP |
| Bottom |
10 HP |
| Left |
10 HP |
| Top |
10 HP |
| Universal spindle |
3 HP
(Germany high frequency motor) |
| Feeding power |
7.5 HP |
| Feeding speed |
6~36 M/min |
| Diameter of first bottom spindle |
40 mm |
| Spindle speed |
6,000 RPM |
| Universal speed |
6,000 - 9,000 RPM
( Frequency inverted speed change ) |
| Tool diameter of first bottom spindle |
100-150 mm |
| Tool diameter of verical spindle |
100-180 mm |
| Tool diameter of horizontal spindle |
100-180 mm |
| Adjustment range of straightening table and edge-joint fence |
10 mm |
| Adjustment range of vertical spindle |
50 mm |
| Adjustment range of horizontal spindle |
30 mm |
| Diameter of feeding roller |
140 x Ø35 mm |
