HOME > Woodworking Machine > Saw: Woodworking Machines > Frame Saw > Thin-Cutting Frame Saw SM-15

Thin-Cutting Frame Saw SM-15
Features:

Designed For Profitable Production
The F15 Thin-Cutting Frame Saw from Mick & Jack is designed and engineered to enhance the high efficiency and high accuracy cutting. In addition to provide various cutting modes, the F15 also features great material - cist saving that creats profits for customer. The machine is equipped with a micro- computer control for maximum operational convenience.

Various Sawblades For Choice
• Upon request, the machine can be supplied with steel welded sawblade or T.C.T. sawblade for choice.
• The customer may choose various sawblade thickness from 1.1 to 1.4mm to suit various wood materials.

Centralized Pressure Regulations
• Each pressure roller is equipped with independent pressure regulator for individual air pressure adhustment.
• All pressure regulation valves are centralized for convenient adjustment and maintenance.
 Micro-Computer Control
• The machine is equipped with a PLC control for maximum operation convenience.
• Electronic components and circuit design fully meet CE safety regulations.
• Comprehensive anti-interference protection devices.
• Self-diagnostic functions and
warning lamp displays.
 Guide Fence At side
In case theguide fence is mounted at the side, the machine alllows for cutting a single wood material.
Multiple Guide Fence
Upon request, the machine is available to supply with several guide fences. Fence sizes can be specified by customer. The use of multiple guide fence enables the machine to cut several wood materials ar a time		 Guide Fence At Center Position
In case the guide fence is mounted
at the center position, the machine
allows for cutting two wood materials at a time for increasing efficiency. 		Sawblade Air Blast
The air blast device procides cooling to the sawblades for extending blades service life. In addition, the device also can remove saw dust existed in blade teeth ensuring high quality cutting at all times.
Stable Cutting
The wood to be cut is supported steadily,ensuring high stability of cutting.

Fine Surface
Extremely fine surface effect after cutting which permits direct glue jointing for saving 0.15mm sanding tolerance		 Saving Cost
The frame saw reduces material loss to a minimum. It saves 20% wood material when comparing with that by a conventoional machining method.		 Accurate Thickness Of Cut
High accuracy thickness of cut is ±0.1mm. No gapping problem on the cut surface.		 Wood cutting performed by the frame saw may reduce material loss to a minimum for saving production cost.

Specification:
Model SM-15
Motor 11 Kw (15 HP)
Feed Speed 0.3~1.7M/min.
Frame Stroke 210mm
Srroke Number Per Minute 450rpm
Height Range Of Cut 30~200mm
Wood Height Difference 0.5mm
Width Of Cut (Side Guide Fence) 60~150mm
Width Of Cut (Center Guide Fence) 2x30~70mm
Width Of Cut (Chennel Type) 2~4x20~65mm
Minmum Block Length 300mm
Slice Thickness >2.0mm
Cutting Accuracy (Under 120mm) ±0.1mm
Cutting Accuracy (Over 120mm) ±0.15mm
Cutting Loss 1.1~1.4mm
Apporx Saw Blade Number < 22 pc
Maxiumum Saw Blade Life 4~24 hour
N.W. / G.W. 2350 / 2600 kgs
Mcahine Dimensions (L x W x H) 3600x800x1900 mm
Packing dimensions 3740 x 1200 x 2210mm