| The specially designed bracket elevation on workpiece pressure system allows for more thickness variation. Auxiliary short stock pressure device makes the machine able to cut stock as short as 300 mm and is also excellent for thin stock. |
 |
 |
 |
LINK CHAIN FEED
The link chain blocks are made of
special cast iron. The high-grade
steel connecting pins are heat-treated and ground. Each precisely made part guarantees accurate straight line feeding even at high speeds.
|
SHORT PIECE AND THIN PIECE
CUTTING
Each two rows of pressure rollers at the front and rear, combined with a specilally designed pressure plate, make it possible for short or thin stock. |
PU PLATED FEED CHAIN BLOCK(OPTIONAL)
The PU plated chain block is used to prevent damage to the workpiece surface. |
 |
 |
 |
VARIABLE FEED SPEED
The variable feed speed allows for cutting various stock materials, and can be easily adjusted by the
handwheel at the stock infeed position. |
DIGITALLY CONTROLLED FORCED LUBRICATION SYSTEM FOR SM-350A
The lubrication frequency and quantity are accurately controlled by a numeric controller, ensuring a proper oil film on the link chain and rail. If there is insufficient oil in the oil tank, the warning lamp lights up, and the link chain stops running automatically. This fully ensures the service life of the link chain and rail. |
ELECTRICAL AMPERAGE DISPLAY
An overload protection of the saw motor. If the load of the saw motor exceeds the rated amperes, the link chain slows down automatically. This prevents the stock push from damaging the saw arbor or damaging the sawblade. Prolongs the life of sawblade by up to 10-20%.The variable feed speed is frequency controlled by a converter and easily adjusted by the control panel. |
 |
|
|
LASER DEVICE (OPTIONAL)
Provides convenient positioning of cut, which reduces material waste to a minimum. |
|
|
| Model |
SM-300A |
SM-350A |
| Maximum cutting thickness |
120mm(4.724") |
135mm(5.315") |
| Maximum cutting width |
95mm(3.74")(Option) |
95mm(3.74")(Option) |
| Maximum cutting width |
300mm(11.811") |
350mm(13.78") |
| Distance from column to chain block |
360mm(14.173") |
380mm(14.961") |
| Minimum pressing length |
500mm(19.685") |
650mm(25.591") |
| Min press length (Optional) |
300mm(11.811")(Option) |
300mm(11.811")(Option) |
| Maximum Saw blade diameter |
Ø38mm(15") |
Ø40mm(16") |
| Minimum Saw blade diameter |
Ø25mm(10") |
Ø25mm(10") |
| Saw blade bore diameter |
Ø70mm(2.756") |
Ø70mm(2.756") |
| Spindle diameter |
Ø50mm(1.969") |
Ø55mm(2.165") |
| Spindle reverse speed |
3800R.P.M. |
3800R.P.M.(50,60 HP)/3000R.P.M.(75 HP) |
| Spindle motor |
30,40,50,60HP |
50,60,75HP |
| Feed speed |
7.5~30M/min(24' ~98'/min) |
7.5~30M/min(24' ~98'/min) |
| Feed speed by inverter(Optional) |
5~25M/min(16' ~82'/min), 3HP |
5~25M/min(16' ~82'/min), 3HP |
| Feed motor |
2HP |
2HP |
| Press wheel, Auto. Vertical motor |
0.5HP |
1HP |
| The height of working table(H) |
740mm(29.134") |
740mm(29.134") |
| Table surface area (L x W) |
1530 x760mm(60"x30") |
1840 x770mm(72"x31") |
Maximum Machine dimensions
(L x W x H) |
1930x1500x1350mm(76"x59"x53") |
2340x1600x1510mm(92"x63"x59") |
| Packing dimensions |
1800 x1700 x1600mm(71"x67"x63") |
2090 x1750 x1600mm(82"x69"x63") |
| N.W. / G.W. |
2050 / 2300kgs |
2400 / 2700kgs |
| * Specifications and other features are subject to change without notice. |
