HOME > Woodworking Machine > Tenoner: Woodworking Machine > Retangular Tenoner TM-115

Retangular Tenoner TM-115
Outstanding Features:
  • Built with two tables for higher efficiency operations. High production rate up to 12 pcs per minute.
  • Pneumatically operated table longitudinal traverse.
  • Adjustable tenoning width.
  • The tenon without removing the door, depth can be conveniently adjusted.
  • 5. Table tilts 20°
  • Movable table to save time, and speed can be variable adjustment.
  • Convenient setup of tenon directions at horizontal, vertical and 45° Miter gauge provided on the table allows for cutting bevel tenons.
  • Oil bushings on the table support and the disk.
  • Centralized control panel provides convenient operations.
  • Designed for producing various types of tenon.
  • Variable table feed speed suits various types of wood material.

    Cutterhead Structure(Standard)
    1.Suitable for medium hardness wood materials.
    2.Production rate 12 pcs per minute.
    3.Tearing may occur when applying for high hardness wood materials.
    4.Sharpening frequency is 6-7 days of operation.    		 24T Helical Cutterhead (Optional)
    1.Excellent for all soft and hard wood materials.
    2.360° cutting.
    3.Fine chips.
    4.No tearing.
    5.Forced chip removing to eliminate repeated cutting.
    6.Low noise, long service life, insert life up to 120 days.
    7.5 years warranty.

    Variable Cutter Feed Speed
    The machine employs two speed regulator knobs to adjust the table feed forward and backward speeds. Variable feed speeds makes the machine ideal for cutting hard and soft wood.    		 Oilless Bushings
    Eliminates the use of lubricator, the table support and the disk are equipped with oilless bushings. Manufactured from high tensile copper alloy for long service life, these bushings also feature impact resistance and maximum wear resistance.    		 Disk Speed Controlled By Frequency Inverter (Optional)
    When requested, a frequency inverter can be applied to control disk speed. It permits variable speed adjustment for various type of wood material. This device is recommended when cutting plywood, MDF, and easily cracked panel.

    The TM-115 is capable of producing various tenons


    Description :
    MODEL TM-115
    Spindle speed 6000 R.P.M.
    Maximum tenon width 115 + 2R mm
    Maximum tenon depth -
    With Standard Tool 12~45mm
    With Special Tool 6~90mm
    Capacity 12pcs/min
    Table Tilt -
    Upward 0~15°
    Downward 0~30°
    Side 0~20°
    Spindle motor 5HP
    Cutter cycle motor 1HP
    Net weight 1100kgs
    Gross weight 1200kgs
    Machine dimensions 1760 x 1150 x 1320 mm
    Packing dimensions 1870 x 1240 x 1620 mm