Features:
Equipped with a PLC control combined with touch sensing screen for user friendly operation.
Fully automatic tenoning operation greatly upgrades production output.
Cutting tenons at both ends simultaneously for greatly increasing efficiency and productivity.
Designed for producing rectangular and cylindrical tenons.
The machine is suitable for producing horizontal, vertical and mitered tenons.
Cutter feed speed is controlled by frequency inverter, allowing for variable speed change.
Equipped with an workpiece magazine for fully automatic operation.
Workpiece feed slideways are equipped with precision linear motion guides, ensuring fast and stable feed motions.
Convenient efficient operation
The machine permits for two operators' operation. Entire motion sequences are automatically operated except for clamping and unclamping of workpieces.
 |
 |
Smooth Feed Motion
The workpiece feed slideways are equipped with precision linear motion guides,providing fast and extremely smooth feed motions.
Feed carriages at both sides are transmitted by a single shaft, ensuring synchronized travel. |
Convenient Tenon Width Adjustment
Tenon width adjustment is conveniently made by simply turning the adjustment knob. A mechanical meter is equippedfor accurately indicating the width adjustment amount. |
 |
 |
Workpiece Magazine
A magazine is equipped at front of the machine. Operator simple place workpieces into the magazine. Then the machine will automatically perform workpiece feeding and tenon cutting, this provides maximum operation convenience and upgrades productivity.
The finished products will automatically outfeed to the product rest, permitting operators to take products with ease. |
User-Friendly Control
The machines is equipped with a PLC for controlling the entire motion sequences. It combines with touch sensing screen, providing maximum operation convenience. An Amp.meter is provided on the control panel for indicating the loading condition on main motors. The controller Provides major functions as below:
*Chinese/English display conversion.
*Selection of operation mode as manual,Automatic, semi-automatic and fully automatic.
*Malfunction indication
*Timing display
*Production quantity setting and display. |
 |
Warpped workpiece Tenoning
The workpiece clamps at both sides are adjustable to suit workpiece warpping condition. This permits the machine to perform tenon cutting on a warpped workpiece. |
Description :
| MODEL |
TM-D100 |
TM-D200 |
| Maximum length of cut |
1500mm |
2000mm |
| Spindle Speed |
9000 R.P.M. |
9000 R.P.M. |
| Maximum tenon width |
100 + 2Rmm |
100 + 2Rmm |
| Maximum tenon depth |
40mm |
40mm |
| Minimum tenon depth |
10mm |
10mm |
| Maximum tenon thickness |
30mm |
30mm |
| Cutter drive motor |
3kw x 2 (4HP x 2) |
3kw x 2 (4HP x 2) |
| Rotation motor |
0.5kw x 2 (0.7HP x 2) |
0.5kw x 2 (0.7HP x 2) |
| Head position adjustment motor |
1kw (1.5HP) |
1kw (1.5HP) |
| Total horsepower |
8kw |
8kw |
| Dust hood outlet diameter |
Ø60mm x 2 / Ø100mm x 2 |
Ø60mm x 2 / Ø100mm x 2 |
| N.W. / G.W. |
2460kgs / 2915kgs |
2680kgs / 3155kgs |
| Machine dimensions (L x W x H) |
4100 x 2600 x 2010mm |
4800 x 2600 x 2010mm |
| Packing dimensions (L x W x H) |
3570 x 2000 x 2000mm |
4270 x 2000 x 2000mm |
|
